The glass fiber reinforced plastic sculpture is made by hand paste forming method. Before manufacturing will be based on the shape of the sculpture characteristics, from the point of view of easy molding and mold release, can be synthesized into a number of units of the mold. To form a unit product, then combine them into a whole. In the end, the whole product is disposed and coated, and a glass fiber reinforced plastic sculpture is made.
The prepared silicone rubber is divided into several sub surface coating on the original model, the silicone rubber layer should be more than 1mm. After the silicone rubber was crosslinked, the glass fiber reinforced plastic layer with a thickness of about 3mm was formed on the silicone rubber. When the glass fiber reinforced plastic is solidified, the whole mould is cut through the partition of the unit block, and the attention of the glass fiber reinforced plastic layer and the silicon rubber layer at the same time is cut. In the unit block making connection rib, the connecting rib shall be provided with a positioning groove to ensure that the unit block mold is combined into a whole through the connection rib. After the above work is completed, the glass fiber reinforced plastic unit is removed, and then the silicon rubber layer is removed, and the silicon rubber block is immediately put back into the glass fiber reinforced plastic unit mold.
Glass fiber reinforced plastic sculpture by hand molding method, should be designed before the production line. From one end of the sculpture, the combination of a part of the mold after the paste products. To be a part of the curing before the combination of mold, continue to paste products. In the premise of easy molding operation, the mould unit block can be combined as many as possible at a time. So repeat, and finally set aside a unit block, the unit block in advance, after the formation of a piece of plastic on the sculpture. Glass and steel sculpture similar to animal angle, legs, tail and is difficult to use the way of making the local, can with the corresponding metal material is formed into a substantially the shape and in metal material molding of glass steel, after grinding way of dressing.
Glass and steel sculpture molding, color, including background, painted, the outer protective coating, such as the need to cast copper cast bronze sculpture only background and smooth outer paint layer. Glass steel production technology: the finished product before making, first to make products with specific mud material shape corresponding to production of products, clay draft after completion of production, turn of gypsum mould, and the glass fiber reinforced plastic (i.e. resin and glass cloth conjugates) brushing in the mold. After the dry, open the outer mold, through the mold of the procedure, the glass fiber reinforced plastic. But the glass steel sculpture in the outdoor through the sun exposure and wind erosion, generally more than five years began to have deformation, fragile and easy to crack the shortcomings.
Above is the mold silicone rubber (silica gel) in the large glass sculpture on the use of the relevant introduction, if you want to further understand the Yi Jia San can be concerned about the official website.
Yi Jia San silica gel Co., Ltd. was founded in 2008, is a collection of organic silica gel new materials research and development, production, sales and service in one of the professional raw material manufacturer. Over the years has formed a product development, quality supervision, market operations, service consulting, a complete set of operating mechanism.
The company owns the main products are: silicone (Xi Likang), silicone rubber, silicone rubber, RTV-2 mold silicone rubber, room temperature vulcanized silicone rubber, crafts with silica gel, etc..
Would like to know more liquid silicone information can browse our website or advisory hotline: 0755-85200989, we will serve you wholeheartedly!